Mixer Valve

Easy and fast mixing of your coolants

Mixer Valve for mixing of cutting fluids and other non-corrosive fluids. Very easy to use and very accurate! Made with safety check valve which prevents back flow. With scale for easy adjustment!

Technical specificationsr

mixer_thumb Fittings ½” inlet – ½” outlet
Min. water pressure 1 bar
Mixing range approx. 1 – 20 %
Safety 2 check valves to prevent back flow
Adjusting Hand wheel wheel with scale.
Dimensions & weight 250x 190 x 70 mm · 1,4 kg.

Derfor er en mixer ventil en særdeles god investering

  • Fast and easy to use.
  • Ensures an homogeneous mixture according to your requirements.
  • Safety valves to prevent back flow
  • Easy to adjust, using the hand wheel

Mixer valve made for easy fitting on a drum. Inlet and outlets are made to fit a standard water hose. This mixer valve is distinguished by its outstanding accuracy, which makes it very easy to blend the correct mixture of you cutting fluids and water, and in this way save production costs!

When the mixer is fitted on the drum, simply adjust the wheel using the scale to the desired position. Now turn on the water and the mixer will do the rest of the work for you – fast, easy and cost efficient. Using the right mixture of cutting fluids will make your tools last longer and you will save cutting fluids, and thereby keep your running cost as low as possible.

Use the Schnell Teknik refactometer to measure the concentraion of your emulsions and obtain the best performance conditions! Right mixture saves costs by improving tool performance!